When spring clip collars are the right tool
Spring clip collars are a simple, dependable way to keep weight plates from sliding on an Olympic bar. They suit lifters who want a quick on-and-off solution for squats, snatches, cleans, and other strength movements where plates can shift as you add weight. The ProsourceFit Olympic Spring Clip Collars are sold in pairs and fit standard 2-inch barbell sleeves, so they work with the bars most home and commercial gyms use.
The main appeal is speed. A spring collar slides on and grips the sleeve without any tightening mechanism, which makes it easy to change plates between sets. If your training involves frequent load changes—like powerlifting or CrossFit-style workouts—that convenience matters. The tradeoff is that spring collars rely on spring tension rather than a locking clamp, so they are not the best choice for every situation.
What the ProsourceFit spring clip collars give you
- Olympic Spring Clip Collars: Fits 2-inch Olympic barbells and comes in a set of 2. Confirms compatibility with standard Olympic sleeves and that you get a pair for both sides of the bar.

Olympic Spring Clip Collars - Olympic Spring Clip Collars: High-quality steel collar fits snugly around standard 2-inch barbell sleeves for a tough grip. Steel construction and a snug fit are the core reasons these collars hold plates securely during lifts.
- Olympic Spring Clip Collars: Removable plastic handles are easy to grip, even during sweaty workouts. Handles make it simpler to slide the collars on and off, which is the main practical advantage over bare spring clips.
How to put spring clip collars on and take them off
The supplied product information describes a simple slide-on design with easy-to-grip handles. It does not include a step-by-step tightening procedure, so the steps below stick to what the record confirms: sliding the collars onto 2-inch bars and using the handles for a secure fit.
- Load your plates first: Slide the weight plates onto the barbell sleeve before adding the collar. The collar sits outside the plates to keep them from moving inward.
- Grip the handles: Use the removable plastic handles to hold the collar. They are designed to be easy to grip, even when your hands are sweaty.
- Slide the collar onto the sleeve: Push the collar onto the 2-inch sleeve until it sits snug against the outer plate. The spring design should grip the sleeve firmly.
- Repeat on the other side: The collars are sold in pairs, so use one on each side of the bar to keep the load balanced and secure.
- Remove by sliding back: To change plates, grip the handles and slide the collar off the sleeve. No unscrewing or unlocking is required.
Spring collar vs clamp collar: which one do you need?
The choice between a spring collar and a clamp collar comes down to how much security you want versus how fast you want to change plates. Spring collars, like the ProsourceFit pair, rely on the spring's tension to hold the collar against the sleeve. They are lightweight, quick to move, and the handles make them easy to handle mid-workout. For most squats, presses, and Olympic lifts at moderate loads, that is enough to keep plates from sliding.
Clamp collars typically use a locking mechanism that tightens around the sleeve. They can feel more secure under heavy loads or when the bar is moving fast, but they usually take longer to put on and take off. The supplied information for the ProsourceFit spring collars does not include a maximum load rating or a claim about locking strength, so if you regularly lift near your absolute limit or train with very fast, explosive movements, consider whether a clamp-style collar better matches your risk tolerance. For everyday strength training and quick plate changes, the spring clip design is a practical, no-fuss option.
Barbell collar safety checkpoints
These checkpoints focus on what the supplied product evidence supports: proper fit on 2-inch sleeves, secure plate contact, and using both collars.
- Check the sleeve diameter: These collars are made for 2-inch Olympic barbells. Using them on a different sleeve size may not give you a snug fit.
- Seat the collar against the plate: Slide the collar until it touches the outer plate. A gap lets plates slide and defeats the purpose of the collar.
- Use both collars: The set includes two collars. Using one on each side keeps the bar balanced and the plates secure.
- Inspect the handles: The plastic handles are removable. Make sure they are attached and easy to grip before you load the bar, especially if your hands are sweaty.
- Recheck after warm-up sets: Spring tension can settle as you load and unload plates. Give each collar a quick push against the plate before your working sets.
Weight plate collar tips for smoother training
Keep your collars with your bar or in your gym bag so you are not searching for them between sets. Because the ProsourceFit collars have handles, they are easy to grab and slide on without adjusting your grip. If you train in a humid gym or your hands get sweaty, the easy-grip handles are a small but useful detail.
When you are adding or removing plates, slide the collar fully off rather than letting it hang on the sleeve. That keeps the spring from being stretched unnecessarily and makes it easier to slide back on. The supplied information does not include a cleaning routine for these collars, so if they get chalky or dirty, wipe them with a dry cloth and avoid soaking the plastic handles.
Product facts for this guide
- Olympic Spring Clip Collars: Lightweight, durable steel for heavy use. Steel construction supports repeated use in strength training, while the lightweight design keeps the collars easy to handle.
- Olympic Spring Clip Collars: Ideal for powerlifting and CrossFit. These are the training contexts where quick plate changes and secure plates matter most.
- Olympic Spring Clip Collars: Catalog price is USD 7.25, compared with a catalog comparison price of USD 10.99. Gives you a sense of the value if you are comparing spring collars with other options.


